Abranet and Abralon: Abranet comes in discs, rolls and sheets, Abralon is foam backed in discs and hand pads.

Sanding with Abranet
Sanding dust is a major health problem in many industrial sectors. Dust from
paint, lacquers and hard wood can contain a lot of harmful particles. Abranet
has solved the dust problem with a simple but clever solution. Now it is fi nally
possible to protect your respiratory organs from harmful sanding dust.
Sanding without disturbing dust particles also provides better control over
the work. Also the end product is improved due to less dust problems during
surface treatment.
One of Abranet’s many advantages is that the sanding sheets or discs have a
longer lifespan than traditional sanding materials.
The Abranet family is continuously expanding with

This unique patented sanding material contains thousands of small holes, making it possible to effectively vacuum away dust and other particles  without clogging the disc surface. The result is seen as a very uniform sanding pattern and a perfectly smooth surface. Since the amount of airborne dust has been minimised, the work environment is remarkably improved.

Abranet® has been developed for sanding putty, primers, lacquers, composite materials and a large amount of other materials. This is a durable long-lasting sanding material.

* Revolutionary new technique for dust-free sanding
* Multifunctional product used both within the automotive and wood industries as well as on composite materials
* Durable long-lasting product

Abralon® is a unique multifunctional patented sanding material developed for the flexible sanding of both smooth and profiled surfaces.

Abralon® creates a smooth sanding pattern on angled surfaces and edges, while minimizing the risk of pressure marks. Abralon®  is especially suitable for use in the automotive and marine industries. The flexible weave allows water and air to pass freely, making the product suitable for both dry and wet sanding, either by machine or hand. Abralon® is also suitable for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP), lacquers, etc.

* Coarser grits are recommended for
- surface preparation of composite body parts
- fine sanding of the body surfaces before primer and top lacquer

* Finer grits are suitable for
- smoothing of primers and bottom lacquers
- preparation of surfaces between blending
- sanding of pot marked surfaces
- preparation of the top coat before polishing